Low cost, small, and powerful- this video transmitter is gonna give you a lot of bang for the buck, and weighing in less than 1gram!
Specification and Purameters： -Brand Name:NameLessRC -Item Name: Nano400 VTX -Output Power: PIT/25mW/100mW/200mW/400mW Switchable -Control Mode: BFOSD Control(RX) -Input Power: 5V -Video System: NTSC/PAL -Antenna: IPEX -Size: 12.4MM*12.4MM*3.5MM Weight: 0.7g Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ Attention: Nano400's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations if you need to unlock the frequency.
Frequency and power control methods： -The NLRC Nano400 VTX is set up via BFOSD Control (IRC Tramp) -The NLRC Nano400 VTX’s default set up is lock on 25mw. -To lock/unlock the VTX channels, please enter the PIT mode for three times within 30secs after powering up the VTX (PIT mode switch is set in BF mode page). The 3 LEDs will flash one by one if the VTX is successful to lock/unlock. Please re-power the VTX after this step. LED functions： -Orange LED shows channels status. Green for bands and Blue for power. -The Green LED flash after Orange and blue LED flash at the same time means the VTX enter PIT mode successfully. -The three LEDs will flash one by one after the VTX is powered. After that, each LED will flash to show the channel, band & power’s status. Orange LED flash 1 time for Channel 1, 2 times for Channel 2. Green LED flash 1 time for Band 1, 2 times for Band 2 and so on. The three LEDs will flash one by one again after finish showing the status